Lawrence Webster Forrest (LWF), Fire Engineering and Fire Risk Management Consultants
Lawrence Webster Forrest (LWF), Fire Engineering and Fire Risk Management Consultants



Navigation

Client login
Forgotten password
Follow us on Twitter Follow us on Facebook Subscribe to our blog

Lawrence Webster Forrest
Legion House
Lower Road
Kenley
Surrey
CR8 5NH

Tel: +44 (0)20 8668 8663 Fax: +44 (0)20 8668 8583
E-mail: fire@lwf.co.uk

Fire Safety for Healthcare Premises - Escape from Plant Areas & Security - Part 29

Posted by LWF: 05/07/2018 12:24

In LWF’s blog series for healthcare professionals, the aim is to give information on best practice of fire safety in hospitals and other healthcare premises. In part 28 of this series, emergency and escape lighting and the associated precautions were discussed. In part 29, LWF will talk about means of escape from plant areas before moving on to look at maintaining security or segregation during an evacuation.

Plant areas may contain a variety of equipment and contents and therefore, the means of escape should be designed to reflect the particular fire hazard contained within. The potential for free movement should also be considered, especially in cases where the area has unusual features which may cause a problem for those evacuating, such as low headroom.

In order for the escape route to be considered suitable and safe, it should be clear of any obstruction and must have a clear height of at least 2 metres throughout. 

In plant areas with two exits or more, the maximum travel distance from any point within the area to an exit should be a maximum of 25 metres, where an alternative exit is provided. Of the 25 metres, only 12 metres should be the maximum single direction of escape. 

In some plant areas with only one exit, the maximum travel distance must be no longer than 12 metres.  In addition, where only one exit is available, an alternative means of escape must be provided in the form of a ceiling hatch and fixed ladder. 

Some plant rooms may be very low risk as a fire hazard, such as those only containing air handling plant, and in this case, the travel distances can be extended to 25 metres and 35 metres respectively.


Security and Segregation


In some healthcare premises, it may be necessary to maintain security and/or segregation of patients during an evacuation. While most premises have secure doors which automatically release upon activation of the fire alarm, these may not be suitable in all circumstances.

In cases of automatic door release, it can be difficult for staff to maintain segregation of patients. Patients would be able to wander, perhaps not following the evacuation route or potentially, they may try to abscond, which could put themselves or others at risk. 

In addition, a lack of supervision could mean that each person could not be accounted for at the assembly point outside the building, or in the place to which evacuation had occurred within the building.

In situations where security and segregation are required, areas must be purpose designed with fire procedures and levels of staffing to allow the operation of key-operated or other staff controlled means of escape from that area.

While such systems can involve a slight delay when compared to automatic door release, the smooth and controlled evacuation supervised by well-trained staff will compensate.

In part 30 of this series, LWF will discuss Internal Fire Spread. In the meantime, if you have any questions about this blog, or wish to discuss your own project with one of our fire engineers, please contact us.

Lawrence Webster Forrest has been working with their clients for over 25 years to produce innovative and exciting building projects. If you would like further information on how LWF and fire strategies could assist you, please contact Peter Gyere on 020 8668 8663.

While care has been taken to ensure that information contained in LWF's publications is true and correct at the time of publication, changes in circumstances after the time of publication may impact on the accuracy of this information.

Leave a reply

  *

  *

 


CAPTCHA Image

[ Change the image ]


*Required

Subscribe to our fire safety blogs

Bulletins
Email Format
* indicates required

FIRE SAFETY BLOGS

  • Fire Engineering Design and Risk Assessment - Compartmentation & Life Safety - Part 5

    In LWF’s Fire Engineering blog series for Architects and others working in the building design business, we have been discussing compartmentation. In part 4 of this series, the ways in which compartmentation supports life safety functions in a fire situation were summarised. In part 5, we look at the ways the issue of compartmentation and life safety is covered in the national building regulations, before looking at the spread of fire. 

    Read more...

  • Fire Safety for Healthcare Premises - Compartmentation & Fire Hazard Rooms and Areas - Part 39

    In LWF’s blog series for healthcare professionals, the aim is to give information on best practice of fire safety in hospitals and other healthcare premises. In part 38 of this series, the importance of fire stopping the joints between fire separating elements such as walls and any openings was discussed. In part 39, we will continue in that area by looking at fire hazard rooms and areas.While most types of buildings require the protection...

    Read more...

  • Facilities Management & Fire Safety - Content of Fire Training - Part 13

    In LWF’s blog series for those who work in Facilities Management, or who have an interest in or responsibility for Fire Safety, we have been looking at the necessity for staff training and fire drills. In part 12 we looked at the implications of committing to fire safety training in a business or organisation in terms of time commitment. In part 13, the necessary content of the fire safety training sessions is outlined. All comprehensive...

    Read more...

  • Fire Engineering Design and Risk Assessment - Maintenance of Compartmentation - Part 4

    In LWF’s Fire Engineering blogs for Architects and others who work in the building design business, we have been looking at compartmentation of buildings to avoid fire spread from the compartment of fire origin to any other area. In part 3 of this series, the fire-resisting performance of elements which go into comprising a fire-resistant compartment was discussed. In part 4, we discuss how a compartment’s integrity is only as good as its ongoing maintenance,...

    Read more...

  • Facilities Management & Fire Safety - Staff Training & Fire Drills - Part 12

    In LWF’s blog series for those who work in Facilities Management, or who have an interest in or responsibility for fire safety, we have been looking at staff training and fire drills. In part 11 of this series, methods of training were discussed and in part 12, we will continue from that point to discuss the practicalities of who should receive training and how it should be organised.Adequate fire training should be given to...

    Read more...

Case Studies

The Wohl Neuroscience Institute - Fire Safety, Strategy & Engineering
Key Facts: Client: King’s Clinical Neuroscience Institute Project Manager: MACE Ltd Designers: Devereux Architects/Allies and Morrison Approximate Size: 7,400m2 Description of the Project:...

Read more..

General Bulletins

Fire - The External Risk
When we consider fire safety, our focus is normally from within, what can we do to prevent the occurrence of fire and how we can limit its damage.  Whilst this is the correct stance to take, we m...

Read more..

Technical Bulletins

Evacuation Modelling - Factor in Human Behaviour
Evacuation of buildings can be analyzed in different ways. Approved Document B (ADB) which provides guidance on meeting the requirements of the England and Wales Building Regulations with regard to fi...

Read more..

Site map | Web development London