Lawrence Webster Forrest (LWF), Fire Engineering and Fire Risk Management Consultants
Lawrence Webster Forrest (LWF), Fire Engineering and Fire Risk Management Consultants



Navigation

Client login
Forgotten password
Follow us on Twitter Follow us on Facebook Subscribe to our blog

Lawrence Webster Forrest
Legion House
Lower Road
Kenley
Surrey
CR8 5NH

Tel: +44 (0)20 8668 8663 Fax: +44 (0)20 8668 8583
E-mail: fire@lwf.co.uk

Fire Engineering Design and Risk Assessment - Foam Systems - Part 2

Posted by LWF: 10/05/2018 10:47

In LWF’s Fire Engineering blog series for Architects and others in the building design business, we have been looking at methods of fire suppression. In part 1, we looked at the suitability of foam systems for distinct kinds of potential fires. In part 2, we give an overview of the various types of foam typically available.

Each type of foam concentrate can be performance classified with three properties in mind. These are speed, heat resistance and fuel pick-up. 

Protein foam has poor speed, poor fuel pick-up and excellent heat resistance. It is normally made with hydrolysed protein (animal protein concentrate) and produces a stiff foam which must be aspirated before use. Overall, it has poor firefighting properties.

Fluoroprotein foam exhibits fair speed response to fire, excellent heat resistance and good fuel pick-up (good fuel pick-up indicates low fuel pick-up). Just like standard protein foam, the fluoroprotein foam must be aspirated before use. It is a protein foam made with fluorochemical additives which flows easily.

Film-forming Fluoroprotein foam has a good standard in speed, heat resistance and fuel pick-up. While it can be used at its most effective when aspirated, it can also be used un-aspirated on spill fires. 

Aqueous film-forming foam has excellent speed, fair heat resistance and good fuel pick-up. It is a synthetic foam made with fluorochemical surfactants. As the word aqueous indicates, it is designed to release an aqueous film which flows ahead of the foam giving the excellent speed indicated. The advantage of speed is slightly offset by the inability to produce a durable foam blanket effect. It can be used effectively in both aspirated and unaspirated forms and delivered through any water delivery nozzle, including through sprinklers.

Alcohol-resistant foam is able to produce good speed, excellent heat resistance and good fuel pick-up. They are used on fires involving foam-destructive flammable liquids which absorb water, such as alcohols and methanol. The film produced is polymeric which protects the water in the foam bubbles. The majority of available foams have an AR version. AR foams have a much higher viscosity than normal foams and so care must be taken by designers when considering proportioner performance. 

In part 3 of this series, LWF will continue the overview of available foams for firefighting with Synthetic/high-expansion foams, Class A foam and Fluorine-free foams before looking at foam proportioning. In the meantime, if you have any questions about this blog, or wish to discuss your own project with one of our fire engineers, please contact us.

Lawrence Webster Forrest has been working with their clients for over 25 years to produce innovative and exciting building projects. If you would like further information on how LWF and fire strategies could assist you, please contact Peter Gyere on 020 8668 8663.

While care has been taken to ensure that information contained in LWF's publications is true and correct at the time of publication, changes in circumstances after the time of publication may impact on the accuracy of this information.

Leave a reply

  *

  *

 


CAPTCHA Image

[ Change the image ]


*Required

Subscribe to our fire safety blogs

Bulletins
Email Format
* indicates required

FIRE SAFETY BLOGS

  • Fire Engineering Design and Risk Assessment - Compartmentation - Part 1

    In LWF’s blog series for architects and others in the building design business, we talk about fire engineered and prescriptive solutions for use in England and Wales. In part 1 of this series, we discuss compartmentation of buildings for fire safety purposes.Without effective compartmentation, fire would simply be able to move through a building using the structure as fuel to grow very quickly. Compartmentation is the sub-dividing of a building using fire resisting walls...

    Read more...

  • Fire Safety for Healthcare Premises - Compartmentation - Part 35

    In LWF’s blog series for healthcare professionals, the aim is to give information on best practice of fire safety in hospitals and other healthcare premises. In part 34 of this series, we looked at the role of compartmentation in limiting the spread of fire from one area to another for at least the minimum period of fire resistance required. It was ascertained that this would allow evacuation from the area of fire origin to a...

    Read more...

  • Facilities Management & Fire Safety - Special Duties in the Fire Procedures - Part 9

    In LWF’s blog series for those people who work in Facilities Management, or who have an interest in or responsibility for Fire Safety, we have been looking at what should be contained within an organisation’s Fire Procedures. In part 8 of the series, the duties of a fire warden were discussed. In part 9, the process of accounting for occupants in case of a fire will be outlined.An effective evacuation is one where each...

    Read more...

  • Fire Engineering Design and Risk Assessment - Water Mist System Components - Part 15

    In LWF’s Fire Engineering blog series for Architects and others involved in building design, we have been looking at methods of fire suppression and most recently, water mist systems. In part 14, the basis for design was discussed and in part 15, those components which go into making a water mist system are outlined. Water mist nozzles are primarily designed to generate the very fine droplets of water necessary and to provide momentum for delivery...

    Read more...

  • Fire Safety for Healthcare Premises - Compartmentation - Part 34

    In LWF’s blog series for healthcare professionals, the aim is to give information on best practice of fire safety in hospitals and other healthcare premises. In part 33 of this series, we looked at the potential for fire spread through the internal structure of the building, particularly the minimum periods of fire resistance provided by elements of the structure. In part 34, the use of compartmentation is discussed.Compartmentation is provided by the fire-resistance of...

    Read more...

Case Studies

The Wohl Neuroscience Institute - Fire Safety, Strategy & Engineering
Key Facts: Client: King’s Clinical Neuroscience Institute Project Manager: MACE Ltd Designers: Devereux Architects/Allies and Morrison Approximate Size: 7,400m2 Description of the Project:...

Read more..

General Bulletins

Fire - The External Risk
When we consider fire safety, our focus is normally from within, what can we do to prevent the occurrence of fire and how we can limit its damage.  Whilst this is the correct stance to take, we m...

Read more..

Technical Bulletins

Evacuation Modelling - Factor in Human Behaviour
Evacuation of buildings can be analyzed in different ways. Approved Document B (ADB) which provides guidance on meeting the requirements of the England and Wales Building Regulations with regard to fi...

Read more..

Site map | Web development London